AS62981 Peering

Preface

AS62981 is AMS-IX New York's administrative LAN. Although peering is in no regard mandatory, we highly recommend setting up redundant peering sessions for the following reasons:

  • Event Correlation
  • AMS-IX NOC can handle troubleshooting requests more efficiently as long as it has a reference point. Having redundant BGP sessions established to routers situated in separate colocations that we directly administer can be a significant aid.

  • We are one of AMS-IX's peers!
  • Peering with AS62981 means that traffic can be exchanged directly between our administrative LAN and you, eliminating the need to be routed via third parties. This of course is entirely optional, should you not want to attract any additional traffic. Advertising no prefixes at all is acceptable.

Router details

wan-dr1-01.ny.ams-ix.net
ASN: 62981
IPv4: 206.126.240.1
IPv6: 2001:504:34:1::A506:2981:1
Platform: Juniper
Note Please Note the Following:
  • AS62981 only peers with parties that are directly connected to the AMS-IX New York infrastructure.
  • AS62981 does not sign additional contracts for peering sessions (“peering agreements”).

IPv4 peering

This section describes the necessary steps to set up a peering with the AMS-IX New York ASN (AS62981). Also shown is a sample Cisco router config that can be used to set up this peering with the AS62981 routers.

In case of questions, please contact peering@us.ams-ix.net.

1: Add the peer

In the "router bgp xxx" configuration section of your router that is attached to the AMS-IX New York shared medium you should add two peers: the AS62981 routers at AMS-IX.

neighbor 206.126.240.1 remote-as 62981
neighbor 206.126.240.1 version 4
neighbor 206.126.240.1 filter-list 31 in
neighbor 206.126.240.1 filter-list 32 out
neighbor 206.126.240.1 next-hop-self

neighbor 206.126.240.2 remote-as 62981
neighbor 206.126.240.2 version 4
neighbor 206.126.240.2 filter-list 31 in
neighbor 206.126.240.2 filter-list 32 out
neighbor 206.126.240.2 next-hop-self

Adjust the numbers of the AS path filter-lists according to your own preferences.

Optional: Configure the peer-group

You only need to do this if you use peer-groups based on peer location. Where possible, AMS-IX peering routers are located at different co-locations.

neighbor 206.126.240.1 peer-group IPV4-PEERS-A
neighbor 206.126.240.2 peer-group IPV4-PEERS-B

2: Add the access-lists

Make sure the AS path filter-lists are set up such that you only permit routes with the AMS-IX Autonomous System Number from AS62981 and that you announce any routes you care to share to the AMS-IX router.

ip as-path access-list 31 permit ^(62981_)+$

ip as-path access-list 32 permit ^my-AS$
ip as-path access-list 32 permit my-Customer-1$
ip as-path access-list 32 permit my-Customer-2$
...

In case you adjusted the numbers of the AS path filter-lists in Step 1, you should use the same numbers in this step.

Important The above is only an example. In general, you want to configure outgoing access list to only announce your (and your customer's) routes. If you plan on sending us a full routing table, please let us know in advance. We will use best routes for transit. Also, please do not announce AS62981 advertisements to non-customers without our explicit request.

3: Request the peering

After you have configured your end of the peering, the AMS-IX side needs to be configured.

We are offering the capability to request this peering service via my.ams-ix.net portal.

Please login to my.ams-ix.net, navigate to your connections, click the "Show" button next to the connection you wish to enable the peering for, and under the IPv4 and/or IPv6 Router section press the "Enable AMS-IX peering" button.

Please note that the sessions will be configured and activated within one hour.

In case of a problem, please notify AMS-IX by sending an e-mail to peering@us.ams-ix.net stating you set up the peering with the AS62981 router and you want the AS62981 router to start the peering with you. Please include the following details in your e-mail message:

  • Company name
  • IP address of router at AMS-IX New York
  • ASN that the router at AMS-IX New York resides in

The peering from the AS62981 router will be set up as soon as possible. You will be notified when the peering is up.

4: Update your aut-num: object in the RIPE database

Your peering with AS62981 should be registered in the Internet Routing Registry at the RIPE NCC, just like all your other peerings. You can use the template below. Please adjust the cost in the “import” clause according to your own needs and put the correct AS set(s) in the “export” clause

import:      from AS62981
action pref=100;
accept AS62981
export: to AS62981
announce MY-AS-SET


Setting up IPv6 Peerings

If you want to implement IPv6 peerings on the AMS-IX:

  • Use the IPv6 numbering scheme to determine your IPv6 address(es) and configure your router interface(s) accordingly.
  • Please let the AMS-IX NOC (noc@us.ams-ix.net) know that you are IPv6 enabled so we can add your address(es) to the members database.
    Please mention the following details to inform us sufficiently:
    • Name Organisation
    • IPv6 address
    • (optional) Host name (PTR) you would us to map the address to
    • In case you have more than one port, the IPv4 address of the port or its location
  • Invite peers. The AMS-IX New York Members List also lists which members use IPv6.
  • If you wish, you can set up an IPv6 peering with AS62981. To do so, send a mail to the AMS-IX NOC with your peering details.